FIN KNOWLEDGE

bishmann's picture
bishmann started the topic in Monday, 17 Nov 2014 at 5:03pm

Hi All ,
after a bit of your vast wisdom here , got myself a tiny 5'8 fish for small mushy waves , in 78 kgs and currently have fcs g'3 s in it but find them to lack drive and speed anyone have any suggestions on what would be more suitable fins for speed / drive in small waves , old school fcs plugs in the board tri fin .
help would be greatly appreciated .

bish

brutus's picture
brutus's picture
brutus Friday, 3 Sep 2021 at 9:45am

Udo , I use the same C-drive Twins on my personal bds...the quality of the fins coming out of NVS , all G10 , best construction available...everyone should get the G10's NVS fins....

Hastoes's picture
Hastoes's picture
Hastoes Sunday, 5 Sep 2021 at 12:10pm
brutus wrote:
Hastoes wrote:

Any one else had this issue? if so what was a solution ? Any ideas out there .

Hi Hastoes , what dimension board are you riding and what weight are you?

You could be experiencing too much fin, which means, when more pressure/speed is applied to the fin , your weight /board dimensions can't control all the pressure so the fin lifts out of the water.
C-Drives have such a longer base than a normal fin.....even when I was at 95kg's I still used small c-drives....but my hull designs give a loft of lift ( concaves) and drive from very hard edges....
In big guns we have always used smaller fins as big fins feel like they are spinning out , when in actual fact the fin lifts out of the water.....smallest gun fins ever on AB's channel bottoms....hope this helps....send me dims and weight and will be a lot more precise on fin size.

Hastoes's picture
Hastoes's picture
Hastoes Sunday, 5 Sep 2021 at 12:32pm

Sorry regards to reply, been on a work bender. Really appreciate the feedback @brutus. 87kg myself , 5ft 11/3inch height
Riding a Firewire Evo.
5'8 x 20' 1/4 x 2' 11/16
Just thinking that ive maybe reached a ceiling with the quad set up on this board. I've been riding the evo models in the same dims since 2016ish . Had 4 of them haha. Rode it in heavier conditions up to pushy 6ft canguu but fading memories tell me that was on a more upright thruster set up. I'm thinking the c-drives coupled with the actual speed generated by the board design in ballsy waves, produce too much speed ? When im running them in average conditions for the area ( 2-4 ft ) they give me more control, speed and release in every turn. The feeling of generating speed through a turn on these fins are a world away from any other fins ive tried.

Max Wax's picture
Max Wax's picture
Max Wax Sunday, 5 Sep 2021 at 8:01pm

Hi Hastoes, been lurking reading the c drive comments so thought I'd chip in...
I've been using them religously a few years love them in 2+1, twin +1s, tris and quads.
Really like the new nvs feel , the different foil makes them seem more responsive and the g10 is sick.
I actually like the quads sized up relative to other guys my size. I'm 5'9 70kgs with chicken legs and my 5'10 kirk bierke has medium fronts with large rears. Incredible control in late drops but its geared towards hollow reefs and i dont/ can't do turns on it lol. Would put smaller fins in for beachies.
6'4 also a kb round tail has medium fronts medium rears. Magic combo for me does tubes and turns.
I've used grom size thrusters in a Ian Byrne 6 channel 6'4, and another chunky 9'6 gun.
Ridden some thrusters with larger side fins and a smaller center too. Not super into thrusters usually but that gives you release if your struggling with that.
Definitely depends on your board like brutus has said and troy is a legend and always has time to dial your fins in. Hope that helps

udo's picture
udo's picture
udo Monday, 13 Sep 2021 at 6:37pm

C-Drive Quad set Large solid glass - FCS - seller will accept $60
https://www.gumtree.com.au/s-ad/forest-glen/surfing/c-drive-fibreglass-q...

udo's picture
udo's picture
udo Wednesday, 15 Sep 2021 at 4:39pm

,

udo's picture
udo's picture
udo Saturday, 18 Sep 2021 at 11:27am
udo's picture
udo's picture
udo Monday, 1 Nov 2021 at 7:33pm
udo's picture
udo's picture
udo Friday, 26 Nov 2021 at 1:10pm

Has anyone seen this type of fin plug before . ..?
https://www.facebook.com/marketplace/item/264548255723204/?ref=search&re...

morg's picture
morg's picture
morg Friday, 26 Nov 2021 at 9:25pm

Yes they became available around the same time or just after the original FCS plugs. Sam Egan made me a couple of boards with them. The fins base was made with a little angled part on them that inserts into the T-shaped plug. They were better than FSC in that the fin didn’t wiggle sideways as much, and if you ran into something the fin could get pushed back out of the plug rather than tearing the plugs out of your board.
Can’t recall what they were called. I think Perry Underwood who lived around Port Macquarie area invented and sold them.

udo's picture
udo's picture
udo Tuesday, 7 Dec 2021 at 7:22pm

Tom Curren - Rear Quads Fins Larger.

At the right hander ‘Jeffrey’s Bay’ with Tom wearing a wetsuit colored with pink flanks shows Tom riding a four-finned ‘McKee Quattro’ 6’11″ x 18″ x 1-5/16″ swallow-tailed gun. The board is a 1992 version characterized by a fairly spread-out fin cluster with the rear fins being larger
than the fronts and set back fairly close together on the tail. This gave the board amazing hold and drive

udo's picture
udo's picture
udo Tuesday, 7 Dec 2021 at 7:51pm

udo's picture
udo's picture
udo Thursday, 23 Dec 2021 at 11:50am

Brutus do you do these Limited Edition Fins in Twin Tab FCS ?
https://www.mauricecole.com/fins

brutus's picture
brutus's picture
brutus Thursday, 23 Dec 2021 at 12:03pm
udo wrote:

Brutus do you do these Limited Edition Fins in Twin Tab FCS ?
https://www.mauricecole.com/fins

have some coming in the New year....95% of my orders are Futures....but I still use surfinz boxes ( adjustable so I can move my fins around) and so I only use twin tab fins........so I have about 20 sets coming!

udo's picture
udo's picture
udo Thursday, 23 Dec 2021 at 12:20pm
udo's picture
udo's picture
udo Friday, 31 Dec 2021 at 8:54am

udo's picture
udo's picture
udo Sunday, 23 Jan 2022 at 3:49pm

Pushing the Boundaries of the C-Drive Patent ?

J- Drive fins
https://www.ebay.com/itm/123669613744?hash=item1ccb488cb0

pointy's picture
pointy's picture
pointy Sunday, 23 Jan 2022 at 5:05pm
udo wrote:

Pushing the Boundaries of the C-Drive Patent ?

J- Drive fins
https://www.ebay.com/itm/123669613744?hash=item1ccb488cb0

So they changed the name and it gets around the patent?

udo's picture
udo's picture
udo Sunday, 23 Jan 2022 at 5:24pm

Would need a lot more than a name change - I guess Troy Clutton and N.V.S. are aware of them ?
If not Brutus can let them Know.

pointy's picture
pointy's picture
pointy Sunday, 23 Jan 2022 at 6:28pm
udo wrote:

Would need a lot more than a name change - I guess Troy Clutton and N.V.S. are aware of them ?
If not Brutus can let them Know.

A vaguely remember reading that the design must be 10% different to get around patent problems but I don't know if that's true or how you would measure that.

Or make it in China or another country that doesn't care

udo's picture
udo's picture
udo Sunday, 23 Jan 2022 at 7:21pm

Jeez looking around there Ebay store there's not many Fins they dont Copy
i wonder what there wax is like ...?

stunet's picture
stunet's picture
stunet Monday, 24 Jan 2022 at 2:22pm

Yep, Troy knows about them.

You'll also notice the company rips off a number of other fin designs, some of which may not be legally protected, in which case it's theoretically OK to do so, however there's not a single nod or reference to the originators which indicates a shameless vulture at the helm.

Even the name of the company is a rip off.

velocityjohnno's picture
velocityjohnno's picture
velocityjohnno Saturday, 29 Jan 2022 at 7:33pm

That's pretty low.

udo's picture
udo's picture
udo Wednesday, 9 Feb 2022 at 5:22pm

Has anyone tried C-Drives in a Mini Simmons
as a Quad or Twin set up ?

udo's picture
udo's picture
udo Saturday, 12 Feb 2022 at 9:23am

Here's one for the Mcoy boys

udo's picture
udo's picture
udo Sunday, 13 Feb 2022 at 11:02am
udo's picture
udo's picture
udo Friday, 25 Feb 2022 at 3:09pm
udo's picture
udo's picture
udo Wednesday, 9 Mar 2022 at 2:35pm

A Wee bit of Cant...........

udo's picture
udo's picture
udo Friday, 25 Mar 2022 at 12:10pm
chook's picture
chook's picture
chook Friday, 25 Mar 2022 at 12:50pm

udo, I was talking to a mate on Saturday who uses these fins (he also has a couple of Cheyne Horans' winged fins)
his take was that the they produce lift and so raise the tail in big fast clean waves and so aren't suited to those types of waves.
but for other waves -- messy, not so fast they are really good.

udo's picture
udo's picture
udo Friday, 25 Mar 2022 at 12:53pm

Cheers - they sold Quickly gone within 45 mins.

udo's picture
udo's picture
udo Wednesday, 6 Apr 2022 at 7:30pm
lostdoggy's picture
lostdoggy's picture
lostdoggy Wednesday, 6 Apr 2022 at 8:30pm

I ran a fin set a bit like that for a while.
I used an fcs set of twinzer fins and ran them in a round tail quad with the bigs in front.
Went really well.

udo's picture
udo's picture
udo Tuesday, 12 Apr 2022 at 4:05pm
stunet's picture
stunet's picture
stunet Tuesday, 12 Apr 2022 at 5:31pm

Interesting...

blackers's picture
blackers's picture
blackers Wednesday, 13 Apr 2022 at 6:33am

Interesting indeed. Is there anyone else out there doing that with the rear fins?
BTW, "Twad" is my new favourite.

lostdoggy's picture
lostdoggy's picture
lostdoggy Wednesday, 13 Apr 2022 at 6:46am

I wonder how much stress gets put on the bit between the box and the fin proper through a turn.

Optimist's picture
Optimist's picture
Optimist Wednesday, 13 Apr 2022 at 7:00am

They look like they would snap on a bigger wave turn…probably ok for small waves.

udo's picture
udo's picture
udo Wednesday, 13 Apr 2022 at 7:20am

Opti have a look at his web site.

Optimist's picture
Optimist's picture
Optimist Wednesday, 13 Apr 2022 at 7:35am

Had a look and it’s a good read alright…..love seeing people try new things for surfing. I always used to say that one day someone would come up with self tracking fins that follow the arc of the turn.

udo's picture
udo's picture
udo Thursday, 5 May 2022 at 9:49am

&t=65s

udo's picture
udo's picture
udo Tuesday, 7 Jun 2022 at 8:24pm
stunet's picture
stunet's picture
stunet Tuesday, 7 Jun 2022 at 8:29pm

Those top ones in particular. After losing a fin I'm in the process of putting one of those sets back together.

Great fins.

wally's picture
wally's picture
wally Tuesday, 7 Jun 2022 at 9:15pm

If George Greenough could have patented high aspect fins, he would be a pretty rich bloke.

udo's picture
udo's picture
udo Monday, 20 Jun 2022 at 12:47pm
udo's picture
udo's picture
udo Monday, 20 Jun 2022 at 4:13pm
udo's picture
udo's picture
udo Saturday, 25 Jun 2022 at 2:18pm
udo's picture
udo's picture
udo Monday, 18 Jul 2022 at 6:34pm